how to reset blackweb Bluetooth speaker

This is a question we often hear from customers. There are two ways to reset a Blackweb Bluetooth Speaker:

  1. Soft Reset
  • With the speaker off, hold down the Volume Up and Power buttons together for five seconds.
  • The speaker will turn on and off once and then return to its previous settings.
  1. Hard Reset

How do I put my Blackweb speaker into pairing mode?

To put your Blackweb speaker into pairing mode, first, make sure that it is turned on.

Then, press and hold the Bluetooth button on the top of the speaker for about five seconds until the LED light starts flashing blue.

You should then see “Blackweb” show up in your device’s list of Bluetooth devices. Select it, and you’re good to go!

Source: https://www.nstec.com/how-to-pair-a-blackweb-bluetooth-speaker/

How do I connect my Blackweb soundbar to Bluetooth?

There are a few things you’ll need in order to connect your Blackweb soundbar to Bluetooth.

First, make sure that your soundbar is powered on and within range of the device you’re trying to pair it with.

Then, open the Bluetooth settings on your device and select “Blackweb Soundbar” from the list of available devices.

Once you’re paired, you should be able to adjust the volume and other settings from your device.

If you have any trouble connecting, try resetting your soundbar by holding down the power button for five seconds.

How do I connect my Blackweb soundbar to my TV?

There are a few different ways that you can connect your Blackweb soundbar to your TV.

The first and most common way is to use an HDMI cable.

If your TV does not have an HDMI port, you can also use an optical cable or RCA cable.

To connect using an HDMI cable, simply connect one end of the cable to the HDMI OUT port on the back of your soundbar.

Then connect the other end of the cable to the HDMI IN port on your TV. Once connected, you will need to set your TV’s audio output setting to “External Speakers” in order to hear the sound from your soundbar.

If you are using an optical cable, connect one end of the

How do I force a Bluetooth device to pair?

There are a few ways you can go about forcing a Bluetooth device to pair with another device. One way is to put the two devices into “pairing mode.”

To do this with most devices, you simply need to press and hold the power button until the pairing mode symbol appears. Once both devices are in pairing mode, they should be able to connect with each other relatively easily.

Another way to force a Bluetooth connection is by doing a so-called “forced connect.” This is usually done by pressing and holding down both the power button and volume up button on one of the devices until it initiates a search for other Bluetooth-enabled devices.